background image

Assembly

5

• Place the rear base on a flat surface so that the buttons 

face the front base.

• While pressing the buttons on each side of the rear base,

fit the rear legs onto the rear base. Push the rear legs 
down until the buttons on the rear base 

“snap”

into the

holes in each rear leg.

Rear Base

Front

Base

Rear
Legs

• Position the seat face down, with the top of the seat 

facing you.

• Position a seat tube so that the long end is upright and

toward you and the curved end is toward the outside edge
of the seat.

• Insert the curved end of the seat tube through the holes in

the ridges on the seat back.

• Repeat this procedure to assemble the other seat tube to

the seat.

Press

Button

Press

Button

6

• While standing on the rear base, pull the rear legs up.

They should remain secured to the rear base. If you can
remove the rear legs, you have not assembled them cor-
rectly to the rear base. Reread and repeat assembly step 6.

• Set the frame assembly aside for Assembly step 17.

Rear Legs

Pull Up

Pull Up

Rear Base

7

8

Top of Seat

Seat Tube

Long Ends

Ridges

• Pull both rear legs out until they 

“snap”

into place.

Pull

Rear

Leg

Pull

Rear

Leg

5

Curved

End

Summary of Contents for Smart Response B8870

















Reviews: