9
P2896pr-0920
Insert three screws into the holes in the seat back
•
and tighten.
Fit the tabs on the roll bar onto the seat back and
•
vehicle, as shown.
Insert four screws into the holes in the roll bar
•
and tighten.
Roll Bar
Note:
You may want to install the battery before
completing this step. Refer to the Battery Installation
section for instructions.
Fit the tabs on the seat bottom into the openings near
•
the seat back.
Push the front edge of the seat down to
•
“snap”
the seat
in place.
Seat Bottom
ASSEMBLY
13
14
15
16
Screws
Screws
TOP VIEW
FRONT VIEW
TOP VIEW
Place the seat back onto the vehicle, as shown.
•
Seat Back
12
FRONT VIEW
