background image

2

Type

1

Features

Type

1

Features

2

Forward-Facing Installation

26

Locking Lap-Shoulder Belt Installation

 

Figure1illustratesatypicalforward-facing

installationusingthevehicle’slockinglap-

shoulderbelt.

IMPORTANT!

When installing the restraint with 

vehicle belts, store the lower hooks in storage 
slots under cover (see page 16, Fig. 2).

1.. .With.the.restraint.in.the.upright.position,.place.

it.forward-facing.in.the.vehicle.seat..

 IMPORTANT!

Installation can be improved by 

using the tether (see pages 32–33).

2.. .Pull.to.fully.extend.the.vehicle.lap-shoulder.

belt..Hold.the.shoulder.and.lap.portion.of.the.
vehicle.belt.together.and.route.through.the.
forward-facing.belt.path.

3.....Verify.that.the.vehicle.belt.is.not.twisted,.then.

buckle.

(Fig. 2)

...Pull.on.the.vehicle.belt.to.

make.sure.it.is.securely.buckled.

4.. .Kneel.on.the.restraint.to.push.it.into.the.vehicle.

seat.while.removing.slack.from.the.vehicle.lap-
shoulder.belt.

(Fig. 3)

.

5.. .Verify.that.all.connections.are.secure.and.the.

restraint.is.stable...A.secure.restraint.should.
allow.no.more.than.1.inch.of.side-to-side.or.
forward.movement.at.the.belt.path.(see

 “Check 

Buckle Position” 

on.page.30).

1

3

2

27

Forward-Facing Installation

1

Non-Locking ELR Lap-Shoulder Belt 

Installation Using a Locking Clip

Figure1illustratesatypicalforward-facinginstallation

usingthevehicle’snon-lockinglap-shoulderbeltanda

lockingclip.

IMPORTANT!

When installing the restraint with 

vehicle belts, store the lower hooks in storage slots 
under cover (see page 16, Fig. 2).

 

Do not install this restraint using 

a non-locking ELR vehicle belt, 

unless a locking clip is used. 

warning

2

Always use in upright position in 

forward-facing mode. See page 11.

warning

Always use in upright position in 

forward-facing mode. See page 11.

warning

1.. .Remove.the.locking.clip.from.the.user.guide.storage.bag..With.the.restraint.in.the.upright.

position,.place.it.forward-facing.in.the.vehicle.seat..

 IMPORTANT!

Installation can be improved by the using the tether (see pages 32–33.)

2.. .Pull.to.fully.extend.the.vehicle.lap-shoulder.belt..Hold.the.shoulder.and.lap.portion.of.the.

vehicle.belt.together.and.route.through.the.forward-facing.belt.path.

3.....Verify.that.the.vehicle.belt.is.not.twisted,.then.buckle.

(Fig. 2)

...Pull.on.the.vehicle.belt.to.

make.sure.it.is.securely.buckled.

Summary of Contents for Safe Voyage EF20B





















Reviews: