Battery Installation
• Slide the soft giraffe up to access the battery
compartment.
• Loosen the screws in the battery compartment
door with a Phillips screwdriver. Remove the
battery compartment door.
• Insert three “C” (LR14)
alkaline
batteries.
Hint:
We recommend using
alkaline
batteries
for longer battery life.
• Replace the battery compartment door and
tighten the screws with a Phillips screwdriver.
Do not over-tighten.
• Slide the soft giraffe back down to cover the
battery compartment.
• If this toy begins to operate erratically, you may
need to reset the electronics. Slide the power/
volume switch off and then back on.
• When sounds or lights become faint or stop,
it’s time for an adult to change the batteries!
• Protect the environment by not disposing
of this product with household waste
(2002/96/EC). Check your local authority
for recycling advice and facilities
(Europe only).
Battery Safety Information
In exceptional circumstances, batteries may leak
fl uids that can cause a chemical burn injury or ruin
your toy. To avoid battery leakage:
• Do not mix old and new batteries or batteries of
different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the
battery compartment.
• Remove batteries during long periods of
non-use. Always remove exhausted batteries
from the toy. Dispose of batteries safely. Do not
dispose of the product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent
type, as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy
before charging.
• If removable, rechargeable batteries are
used, they are only to be charged under
adult supervision.
1.5V x 3
“C” (LR14)
3
