• Lift the front end of the vehicle.
• Slide the straight end of the steering column through the
hole in the upper steering linkage and out through the
hole in the vehicle body.
• Insert the curved end of the steering column into the
hole in the lower steering linkage.
14
15
Steering
Column
Lower
Steering
Linkage
Upper
Steering
Linkage
Hole
Steering
Column
Cap Nut
• Fit a cap nut on the curved end of the steering column.
• Support the steering column and tap the cap nut with a
hammer to secure it on the end of the steering column.
• Position the vehicle body upright.
12
Assembly
Handlebar
Sound
Box
Neck
• Position the handlebar with the neck facing down and the
handlebar curving toward you.
• Slide the soundbox onto the right end of the handlebar,
soundbox side first.
• Set the handlebar assembly aside.
13
• Position the handlebar so that the side with the three
holes and circular indentation faces up.
• Fit the neck against the bottom of the handlebar, with
the holes in the handlebar and neck aligned.
• Insert a 1
1
/
2
" screw down through each of the two outer
holes in the handlebar and then through the neck.
• Fit a lock nut on the end of each screw.
• Using pliers to steady the lock nuts, tighten each screw
with a Phillips screwdriver. Do not over-tighten.
12
Hole
Hole
Lock Nut
Lock Nut
Handlebar
Circular
Indentation
Neck
