T6991a-0920
9
Steering Wheel
Large Opening
Steering
Column
Lower Bend Down
11
12
18
2
1
• Place the labels exactly as shown in the illustration and
avoid repositioning a label once it has been applied.
• Wipe the steering column with a paper towel to remove
any excess lubricant.
• Position the steering wheel so that the
large opening
is upright
.
• Position the steering column with the
lower bend
down
, as shown.
• Fit the steering wheel onto the steering column.
5
DASH VIEW
• Align the hole in the steering wheel with the hole in the
steering column.
• Insert the 0,25" x 2,85" pin
all the way through
the
hole in the side of the steering wheel and into the
steering column, as shown.
6
•
“Snap”
the steering wheel cover onto the steering wheel.
Hint:
If the steering wheel cover does not "snap" onto
the steering wheel, you have not properly assembled
the steering column to the steering wheel. Remove the
pin and the steering column from the steering wheel
and refer back to Assembly steps 5 and 6.
7
0,25" x 2,85" Pin
Steering Wheel Cover
ASSEMBLY
4
