background image

J5248pr-0920

14

As assembled, your vehicle is ready to roll in low speed (2

1

/

2

 mph, maximum). It has been pre-set so it will only operate in low speed. After your 

child has mastered the basic skills of driving and understands the rules for safe driving, it’s time to remove the high speed lock-out screw to allow 
the vehicle to operate in low or high speed

. See the instructions on this page to remove the high speed lock-out screw.

Beginner Use - Low Speed Drive

•  Make sure the shifter is in the low speed 

 position .

•  Press down on the foot pedal. The vehicle goes forward at a maximum 

of 2

1

/

2

 mph. Help your child practice steering to learn how far and how 

quickly to turn the steering wheel when driving forward in low speed.

To Back Up

IMPORTANT! To avoid damaging the motors and gears, stop the 
vehicle before shifting from forward to reverse.

 Once your child is 

completely comfortable with operating the vehicle in the forward mode, 
introduce reverse.
•  Make sure the shifter is in the reverse 

 position.

•  Press down on the foot pedal.The vehicle will go in reverse at 

a maximum of 2

1

/

2

 mph. The vehicle is designed to operate in 

low 

speed only in reverse

. Help your child practice steering to learn 

how far and how quickly to turn the steering wheel when driving 
in reverse.

Advanced Use - High Speed Drive

•  Before you disconnect the high speed lock-out, make sure your 

child knows how to steer, how to start and stop the vehicle and 
knows the rules for safe driving. When the high speed lock-out is 
disconnected, the vehicle can be driven forward in low speed 
(2

1

/

2

 mph, maximum) or high speed (5 mph, maximum).

•  Make sure the shifter is in the low speed 

 position.

•  Loosen and remove the screw in the shifter box.
•  Place the lock-out screw into the hole in the shifter handle for future 

use. It can be re-inserted into the shifter box to lock-out high speed.

•  Slide the lock-out lever back.

Store lock-out screw here

VEHICLE OPERATION

Remove 

lock-out screw 

for high speed.

Slide lever back 

•  Make sure the shifter is in the high speed 

position.

•  Press down on the foot pedal. The vehicle goes forward at a 

maximum of 5 mph. Help your child practice steering to learn how 
far and how quickly to turn the steering wheel when driving forward 
in high speed.

•  Your vehicle has a patented, electronic braking system that auto-

matically stops the vehicle when your child’s foot lifts from the pedal. 

•  Make sure your child is comfortable with steering the vehicle and 

automatically knows how to stop.

STOP!

Summary of Contents for Power Wheels J5248





















Reviews: