background image

6

In exceptional circumstances batteries may leak fluids that can 
cause a chemical burn injury or ruin your product. To avoid 
battery leakage:

•  Do not mix old and new batteries or batteries of different types: 

alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•  Insert batteries as indicated inside the battery compartment.
•  Remove batteries during long periods of non-use. Always remove 

exhausted batteries from the product. Dispose of batteries safely. 
Do not dispose of product in a fire. The batteries inside may 
explode or leak.

•  Never short-circuit the battery terminals.
•  Use only batteries of the same or equivalent type, as recommended.
•  Do not charge non-rechargeable batteries.
•  Remove rechargeable batteries from the product before charging.
•  If removable, rechargeable batteries are used, they are only to be 

charged under adult supervision.

Battery Safety Information

•  Locate the battery compartment door on the frame.
•  Loosen the screws in the battery compartment door.
•  Remove the battery compartment door. 
•  Insert four LR14 ("C") 

alkaline

 batteries.

Hint:

 We recommend using 

alkaline

 batteries for longer 

battery life.
•  Replace the battery compartment door and tighten the screws.
•  If this product begins to operate erratically, you may need to reset 

the electronics. slide the power switch off and then back on.

Note:

 Low battery power may cause product movement to slow 

and sound volume to become faint or turn off all together. If this 
should happen, please remove and discard all four batteries 
and replace with four, new LR14 ("C") 

alkaline

 batteries.

•  Protect the environment by not disposing of this 

product with household waste (2002/96/EC). 
Check your local authority for recycling advice and 
facilities (Europe only).

Battery Installation

1,5V x 4

LR14 (“C”)

Battery Compartment Door

Summary of Contents for P6033









Reviews: