background image

9

Hub

• Open the frame. Push down on the hub to lock the frame.

PUSH

1

WARNING

Securing Your Child

• For your convenience, lift the mobile arm to move the mobile 

out of the way.

• Lift the edge of the tray tab and lift the tray.
• Place your child in the seat. Position the crotch pad between 

your child’s legs.

• Fasten the waist belts to the crotch pad. Make sure you hear a 

“click”

 on both sides.

• Check to be sure the restraint system is securely attached by 

pulling it away from your child. The restraint system should 
remain attached.

Waist Belts

Crotch Pad

To Tighten

• Feed the anchored end of the waist belt up through the buckle 

to form a loop 

. Pull the free end of the waist belt 

.

To Loosen

• Feed the free end of the waist belt up through the

 

buckle to 

form a loop 

. Enlarge the loop by pulling on the end of the 

loop toward the buckle. Pull the anchored end of the waist 
belt to shorten the free end of the waist belt 

.

Anchored End

Anchored End

Free End

Free End

TIGHTEN

3

2

To prevent serious injury and/or
falls and being strangled in the 
restraint system: 

•  

Always use the restraint system. 
Never rely on the tray to restrain child. 

•  

Not recommended for children who 
can sit up by themselves (6 months 
approximately, until 9 kg/20 lbs). 

•  

Never leave child unattended. 

•  

It is dangerous to use this product on 
an elevated surface. 

 Setup and Use

 LOOSEN

Summary of Contents for K6078













Reviews: