background image

2

CAUTION

This package contains small parts

in its unassembled state. Adult

assembly is required.

To prevent serious injury and/or
falls and being strangled in the 
restraint system: 

•  

Always use the restraint system. 
Never rely on the tray to restrain child. 

•  

Not recommended for children who 
can sit up by themselves (6 months 
approximately, until 9 kg/20 lbs). 

•  

Never leave child unattended. 

•  

It is dangerous to use this product on 
an elevated surface. 

WARNING

•  Please read these instructions before assembly and use of

this product. 

•  Adult assembly is required. Tools needed for assembly: Allen 

Wrench (included) and Phillips screwdriver (not included).

•  Requires four “D” (LR20) 

alkaline

 batteries (not included)

for operation.

•  Only to be used by children that cannot climb out of seat.
•  Product features and decorations may vary from photos.
•  

Great Britain: 

Vanwall Business Park, Maidenhead SL6 4UB. 

Helpline: 01628 500303.www.service.mattel.com/uk.

•  

Australia:

 Mattel Australia Pty. Ltd., 658 Church Street, Locked 

Bag #870, Richmond, Victoria 3121 Australia. Consumer 
Advisory Service 1300 135 312.New Zealand: 16-18 William 
Pickering Drive, Albany 1331, Auckland.

•  

Asia:

 Mattel East Asia Ltd, Room 1106, South Tower, World 

Finance Centre, Harbour City, Tsimshatsui, HK, China.

Consumer Information

Fasteners

Do not over-tighten the screws or the bolt.

M5 Lock Nut – 1

M5 x 3,2 cm Bolt – 1

#8 x 1,9 cm Screw – 4

Fasteners Shown Actual Size 

Summary of Contents for K6078













Reviews: