Assembly
• Position the number 4 pin next to the number 2 pin and the number
5 pin next to the number 3 pin.
• While making sure the tabs on the number 4 and 5 pins are
behind
the number 2 and 3 pins, attach the pins using the same procedure
in assembly step 2.
4
3
• Position the number 2 pin and the number 3 pin next to the number
1 pin.
• While making sure the tabs on the number 2 and 3 pins are
behind
the number 1 pin, attach the pins using the same procedure in
assembly step 2.
Number
2 Pin
Number 3 Pin
Slots
Number 4 Pin
Number 5 Pin
Slots
Slots
2
• At an angle, insert the longer peg on the number 1 pin into the
groove at the front and center of the base.
• Push down on the other side of the pin to
"snap"
it in place.
Number 1 Pin
Grooves
Base
•
"Snap"
the bumpers into the holes on the sides of the base.
Hint:
If a bumper does not seem to fit on one side of the base, try
assembling it to the other side of the base!
5
Bumper
Bumper
1
• Carefully peel a label from the label sheet and attach it to a pin,
as shown.
• Smooth out the label to remove any air bubbles.
• Repeat this procedure to apply the remaining labels to the remaining
bowling pins.
Tabs Behind Pin
Tabs Behind Pins
