2
3
1
Assembly
• Rotate the upper frame tube until it
"snaps"
into an upright
position, as shown.
Upper Frame Tube
Short Tubes
• While pressing the button on the base tube, insert it into a
short tube on a frame tube.
• Push the base tube until it
“clicks”
into place.
• While pressing the button on the other end of the base tube,
insert it into the short tube on the other frame tube.
• Push the base tube until it
“clicks”
into place.
Hint:
You may need the help of another adult to hold the frame tubes
while you assemble the base tube to them.
Press Buttons on Base Tube
2
IMPORTANT!
Before assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use
if any parts are missing or broken. Contact Mattel for replacement parts and instructions if needed. Never substitute parts.
3
3
Press Button on Front Tube
�
• Position the front tube so that the rubber feet are
flat
on
the surface.
• While pressing the button on the lower frame tube, insert it
into an end of the front tube. Continue to insert the lower
frame tube into the front tube until you
hear a "click".
• While pressing the button on the front tube, insert it into the
end of the lower frame tube. Continue to insert the front tube
into the lower frame tube until you
hear a "click".
Rubber Feet Down
Press Button on
Lower Frame Tube
