7
Setup and Use
1
Restraint Straps
Securing your Infant
• Place your child in the seat. Position the restraint pad
between your child’s legs.
• Fasten the restraint straps to the restraint pad.
Make sure you
hear a “click” on both sides.
• Check to be sure the restraint system is securely attached
by pulling it away from your child. The restraint system should
remain attached.
Restraint Pad
Free End
Free End
To tighten the restraint straps:
• Feed the anchored end of the restraint strap up through the
buckle to form a loop
. Pull the free end of the restraint
strap
.
To loosen the restraint straps:
• Feed the free end of the restraint strap up through the buckle
to form a loop
. Enlarge the loop by pulling on the end
of the loop toward the buckle. Pull the anchored end of the
restraint strap to shorten the free end of the restraint strap
.
Anchored End
Anchored End
2
TIGHTEN
LOOSEN
WARNING
To prevent serious injury or death:
• It is dangerous to use this reclined
cradle on an elevated surface, since
child's movement may cause infant
seat to slide or tip over.
• Never use on a soft surface (bed, sofa,
cushion), since seat can tip over and
cause suffocation in soft surfaces.
• Always use the restraint system.
• Never leave the child unattended.
• Never use as a car seat.
• Not recommended for children who
can sit up by themselves (6 months
approximately, until 9 kg (20 lbs).
• To prevent the massaging rollers from
contacting baby’s head, use only for a
baby weighing at least 2.3 kg (5 lbs).
IMPORTANT!
Before each use, inspect this product for damaged
hardware, loose joints, missing parts or sharp edges. DO NOT use if
any parts are missing or broken. Contact Mattel for replacement
parts and instructions if needed. Never substitute parts.
