5
6
Assembly and Setup
Mountain
Fit the mountain onto the bridge track. Push to “
•
snap
”
in place.
Fit the tabs on the upper ramp into the slots in the
•
lower ramp.
Insert two screws into the upper ramp. Tighten the screws
•
with a Phillips screwdriver. Do not over-tighten.
Repeat this procedure to assemble the other upper and
•
lower ramps.
At an angle, fi t the tab on a trestle into the slot on the
•
mountain. Push to “
snap
” in place.
Repeat this procedure to assemble the other trestle to
•
the mountain.
1
3
2
Mountain Track
Trestle
Lower Ramp
Upper Ramp
Track pieces easily snap together.
•
Place the vehicle on the track.
•
Long straight track pieces sold separately and subject to availability.
•
Hint:
We do not recommend using the engine on carpets. For best performance, use on the
track provided or hard, flat surfaces.
Push down on Sherriff to hear fun phrases!
•
4
