GB
-User
guide
GB
-User
guide
To remove the buckle, pass the metal plate on the underside of the car seat through the
window in the car seat shell
(28)
.
Rinse the buckle thoroughly with warm water. Allow the buckle to dry.
Check if you hear a
‘click’
, when you fasten the buckle to the shoulder strap connectors. If there is
no click repeat the process. Leave the buckle to dry before re-assembling on the seat.
However ensure the harness connectors are the correct way round, not twisted and that the
metal plate on the end of the crotch strap is fully through the window and flat against the
underside surface of the shell.
Removing and cleaning the buckle
Do not use this car seat on a shopping trolley.
This car seat is not approved for use on aircraft. For more information contact the airline.
To dispose of your car seat safely always remove the harness and render the seat unusable.
Additional Information
8
To refit the cover and accessories, simply reverse the process, however ensure the harness
and buckle are the correct way round, not twisted, and that the metal plate on the end of the
crotch strap is fully through the window and flat against the underside surface of the seat shell.
BUCKLE FAILURE WILL CAUSE
INJURY. DO NOT OIL ANY PART OF
THE BUCKLE. ALWAYS CHECK
THAT THERE IS NO FOOD DEBRIS
OR OTHER SUCH MATTER IN THE
HARNESS BUCKLE.
WARNING!
GB
-User
guide
FC4923W-ICA 21/12/09 11:38 Page 8