Assembly
• Place the base on a flat surface, facing away from you.
• Fit the Central Park Storefront tabs into the slots in
the base, as shown.
• Place your hand inside the clock tower on the Central
Park Storefront, as shown.
• Slide the Central Park Storefront forward until all three
tabs on the front side of the Central Park Storefront
“snap” into the slots in the base (see inset illustration).
• Make sure the large tab (below the pet shop) and
the two small tabs (below the fire station) on the
Central Park Storefornt are inserted into the slots
in the base.
Base
Tabs
Tab
Slots
Slot
Central Park Storefront
1
2
3
Hole
Peg
Storage
Compartment
Playground Ramp
Base
• At an angle, insert the upper Playground Ramp peg into
the hole inside the storage compartment.
• Push the ramp up as you “snap” the lower Playground
Ramp peg into place.
Hint: The Playground Ramp rotates open for play or close
it to store accessory pieces in the storage compartment.
4
• Insert the two tabs on the Gas Station Ramp into the
two slots in the base near the Fire Station.
• You can also attach the Gas Station Ramp behind the
Fire Station. Insert the two tabs on the Gas Station
Ramp into the two slots in the base.
Hint: The Gas Station Ramp disassembles easily. Simply
lift the tabs out of the slots for removal or re-attachment.
Base
Gas Station Ramp
can be attached here.
Gas Station Ramp
can be attached here.
Slots
Slots
Tabs
Tabs
4
Back View
Large
Tab
Small Tabs
Front View
77702pr-0920 12/6/01 4:21 PM Page 4
