4
• Insert four screws into the handlebar and tighten.
Battery Installation
Assembly
1,5V x 3
AAA (LR03)
• While sliding the ends of the handlebar into the indents
on each side of the zebra’s head, fit the post into the slot
in the top of the zebra’s head.
Handlebar
Post
• Protect the environment by not disposing of this
product with household waste (2012/19/EU).
Check your local authority for recycling advice
and facilities.
5
6
• For longer life use
alkaline
batteries.
• Locate the battery compartment on the back of
the handlebar.
• Loosen the screws in the battery compartment door and
remove the door.
• Insert three AAA (LR03)
alkaline
batteries.
• Replace the battery compartment door and tighten
the screws.
• If this toy begins to operate erratically, you may need to
reset the electronics. Slide the power/volume switch off and
then back on.
• When lights or sounds from this toy become faint or stop,
it’s time for an adult to change the batteries.
