Locking
Lever Release
Locking
Lever
Threshold
➤
➤
➤
• Slide the gate door and stationary panel together.
To Remove
• The pads should be cleaned periodically using a mild
solution of soap and water. If the pad surfaces become
dirty, it may affect holding strength.
• To clean the gate panels, wash with a mild solution of
soap and water. Rinse with clean water to remove soap
residue and wipe dry.
Maintenance
B
A
• Pull the locking lever release
in the direction of the
arrow while lifting the locking lever up
.
• Make sure the top of the triangle on the locking lever
aligns with the top of the triangle on the threshold.
Installation and Use
➤
➤
Handle
➤
Door
Hook
To close gate door:
• Grasp the handle on the gate door.
• Lift the gate door and push it closed so the door hook
latches over the top edge of the gate.
• Lower the gate door.
Gate door is
NOT
in
threshold groove.
INCORRECT
➤
CORRECT
➤
Gate door is in
threshold groove.
Door Lock
Indicator
INCORRECT
CORRECT
Door lock indicator
shows red.
Door lock indicator
does
NOT
show any red.
➤
➤
• Make sure the bottom of the gate door is in the
threshold groove.
4
If you have any questions about this product:
In Canada, call 1-800-567-7724, or write to: Mattel/Fisher-Price, 6155 Freemont
Blvd., Mississauga, Ontario L5R 3W2.
In Great Britain, telephone 01734 770488.
In Australia, call the Fisher-Price Australian Consumer Advisory Service toll-free at
1-800-800-812, or write to: Fisher-Price, Mattel Pty. Limited, 461 Plummer Street,
Port Melbourne, Victoria 3207.
• Make sure the door lock indicator does
NOT
show
any red
.
• If the door lock indicator shows any red, the gate
door has
NOT
been closed properly. Re-read Installation
and Use steps
-
and close the gate door again.
➤
➤
Triangles
B
A
