Assembly
•
No Assembly Required
Operation
1.
Click On by rotating the knob clockwise.
2.
Battery Check
The F-Point will buzz immediately, indicating
that the batteries are in good condition.
If the buzzer does not sound after switching
on, replace the single 9-volt battery.
3.
Rotate the knob until the buzzer sound
stops.
4.
Set the Sensitivity
A. With the buzzer silent, rotate knob back
counterclockwise to the point where the
device is just silent.
B. You want to position the knob in the most
counterclockwise position at which
the buzzer is still silent. This threshold
setting allows you to always set the
device at maximum sensitivity.
PROBE
ON/OFF KNOB
BATTERY
COMPARTMENT
Assembly
•
No Assembly Required
Operation
1.
Click On by rotating the knob clockwise.
2.
Battery Check
The F-Point will buzz immediately, indicating
that the batteries are in good condition.
If the buzzer does not sound after switching
on, replace the single 9-volt battery.
3.
Rotate the knob until the buzzer sound
stops.
4.
Set the Sensitivity
A. With the buzzer silent, rotate knob back
counterclockwise to the point where the
device is just silent.
B. You want to position the knob in the most
counterclockwise position at which
the buzzer is still silent. This threshold
setting allows you to always set the
device at maximum sensitivity.
PROBE
ON/OFF KNOB
BATTERY
COMPARTMENT
F PinPointer.qx6 4/29/09 9:57 AM Page 2
