Read these instructions carefully to familiarize yourself with the product. Please retain
these operating instruction for future reference.
Application:
Mobile laboratory burner for heating and flame sterilizing
SAFETY PRECAUTIONS:
•
On unpacking the unit, check for possible transportation damages. Do not
operate the unit if damages are visible.
•
Pay attention to your relevant rules for using liquid gas.
•
All gas connections must be adequately tightened (Left hand thread).
Ensure gas proofness with a suitable test fluid / equipment. Do not seal up the
swivel nut with Teflon tape etc.
•
If there has been a leakage you have to be extra careful and evacuate the gas by
ventilation.
•
Do not check for leaks with a naked flame. Use soapy water only.
•
Note that LP Gas is heavier than air. Therefore it can easily accumulate in
trenches or below ground level.
•
Unattended operation of the unit is not permissible.
•
Use the appliance on safe distance from walls and other
combustible material.
•
Do not operate the unit near flammable liquids or hazardous materials.
•
Always work in a well-ventilated area.
•
Before connecting a gas cartridge, ensure that the sealing (9) is in place and in
good condition.
•
Never use a unit with damaged or worn seal (9) and never use a leaking, damaged
or malfunctioning unit.
•
Always change or fit the gas cartridge in a safe place, away from any
source of ignition such as naked flames, pilot lights, electric fires and away
from other people.
•
Allow sufficient time for flame orifice (2) to cool down prior to cleaning, desinfecting,
servicing or transport. Ensure that the unit and the gas supply is turned off.
•
Note that the burner orifice (2) remains hot after the flame has been
extinguished. Do not touch. Can cause burns.
•
After use or for any longer period of time without attendance, turn the gas supply
off at the mains and ensure that the gas controller (1) is shut.
The range:
powerjet 2
Art.No.: 6.006.000
Tubing connector with swivel nut
Stainless steel stand
Nozzle for natural gas (08),
Nozzle for propane/butane gas (06)
Box spanner
Adapter CV 360
Wrench 17mm, wrench 15mm,
Instruction manual, 2-year warranty