manualshive.com logo in svg

Fisher & Paykel WM1280J, Installation Manual/User Manual

Share
Download
Fisher & Paykel WM1280J Installation Manual/User Manual Download Page 52

50

MANUFACTURER’S WARRANTY

H

  Transportation or travelling costs involved in the repair when the product is installed 

outside the Fisher & Paykel trained and supported service technician’s normal 
service area.

Nothing in this Manufacturer’s Warranty is intended to, or does limit, any rights you may 
have under law to recover the costs of inspecting or returning the goods to us.

This product has been designed for use in a normal domestic (residential) environment. 
This product is not designed for any commercial use (whatsoever). Any commercial use 
by a customer will affect this product’s Manufacturer’s Warranty.

Service under these Manufacturer’s Warranties must be provided by a Fisher & Paykel 
trained and supported service technician (refer to the ‘Customer Care’ section at the 
back of this book). Such service shall be provided during normal business hours. This 
Manufacturer’s Warranty certificate should be shown when making any claim.

Please keep this user guide in a safe place.

Summary of Contents for WM1280J

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands