Fisher & Paykel WL26CW1, Service Supplement Manual

Page: 13 / 41

517794B
13
PCB and Housing – Part number 421052
The PCB, which contains the capacitive touch
buttons and LCD, is mounted within a plastic
housing. The PCB housing is clipped into the
console at the bottom, and secured with four
screws along the top.
4 CONTROL PANEL
1. Power On/Off button.
2. High-Efficiency mode On/Off. When off, the machine uses the traditional wash mode.
3. High-Efficiency LED used also for data download (refer to Section 14.3).
4. Start/Pause button
5. LCD Screen.
6. Left arrow (used when scrolling through options on the LCD screen).
7. Right arrow (used when scrolling through options on the LCD screen).
8. Select button – Use to confirm setting.
9. Back button - Use to cancel setting.
5 WATER VALVES / DISPENSING SYSTEM
5.1 Water Valves
The water valve assembly incorporates four
valves that are joined by a common valve
body. The two main inlet coils control the flow
of water into the valve body assembly that then
in turn supplies water into the machine through
the inlet nozzle.
Two additional coils are used that control the
valves for the fabric and detergent dispensing.
They control the flow of water to the detergent
and fabric dispensing system via hoses that
run underneath the top deck.
1. Hot coil (White Clip)
2. Cold coil (White Clip)
3. Fabric coil (Yellow Clip)
4. Detergent coil (Purple Clip)
1
2
3
4
1 2 4
5
6 7 8 9
3