11
9
10
SECURE THE WARMING DRAWER TO THE CABINETRY
SECURE THE ANTI-TIP BRACKET (optional depending on cabinetry configuration)
1
Slide the warming drawer fully into the cavity. Ensure it is level.
Important!
Do not lift the warming drawer by the drawer handle.
2
Fully open the drawer (if the drawer has not already been removed).
3
Fasten the warming drawer in place with the two screws supplied, through the front trim,
beneath the drawer. Do not overtighten the screws.
4
Replace the drawer if it has been removed following the steps on the previous page.
If the anti-tip bracket is required (see example scenarios) first secure the product at the front,
then place the bracket centrally at the back of the cavity, sitting it on the top of the chassis.
Secure it to the rear cabinet wall using the screws provided.
