38
CHANGING PRE-SET OPTIONS
Out of balance recovery routine
When your washer is spinning it can sense if the wash load is out of balance. If an out
of balance load is detected, the washer will stop and re-try spinning one more time. If it
still senses an unbalanced load there are two options the washer can take.
Automatic recovery OFF (the default setting)
Your washer will stop, beep, and show
in three phases on the display
screen. You must redistribute the load more evenly yourself. Use this option if you wish
to conserve water.
Automatic recovery ON
Your washer will try to automatically correct the out of balance load. It will fill with
water and agitate to redistribute the load before trying to spin up again.
To change the out of balance (OOB) recovery option:
1
Enter Option Adjustment mode (refer to page 34).
2
Select the ‘Heavy’ cycle.
3
WashSmart™ Eco washer and WashSmart™ washer:
Touch the ‘More’ button to
turn automatic recovery
or
.
QuickSmart™ washer:
Touch the ‘Water Level’ button to turn automatic recovery
or
.
OOB
Recovery
WashSmart™ Eco washer and WashSmart™ washer
(WashSmart™ Eco washer panel is shown)
Changing the OOB routine
OOB
Recovery
QuickSmart™ washer
Changing the OOB routine
