34
CHANGING PRE-SET OPTIONS
Option Adjustment mode
After using your washer a number of times you may want to fine tune some of the
options to suit your wash needs.
There are a number of pre-set options, which can be altered:
1
The wash temperatures, including changing the ‘Cold’ wash temperature to
‘Controlled Cold’.
2
The out of balance recovery routine.
3
The number of beeps at the end of the cycle.
4
Resetting to factory default settings.
To enter Option Adjustment mode
1
Turn your washer on at the wall but
do not
touch ‘POWER’
.
2
Touch and hold the and
buttons together for 3 seconds.
You will hear 3 quick beeps indicating you have entered
Option Adjustment mode. The washer will show the default
setting for the ‘Cold’ wash temperature.
●
●
The diagram on page 35 shows how the wash cycle
icons relate to the options you can change.
●
●
The ‘Changing pre-set options’ section explains the
different options in more detail.
3
Use buttons on the panel to make your changes to the
pre-set options.
4
Touch ‘POWER’
to return to normal mode. Your washer
will automatically remember your changes.
To change or reset any of the options, repeat the above steps.
Entering Option
Adjustment mode
