Stainless Steel Care
This Trim Kit is made of stainless steel.
Start with hot soapy water,
rinse and dry. If the trim kit has food soil remaining, try a general kitchen cleaner, such as Fantastik®, Simple
Green® or Formula 409®. Apply cleaner with a damp sponge, rinse thoroughly and dry. Always scrub lightly
in the direction of the grain. Do not use a steel wool pad, it will scratch the surface. To touch up noticeable
scratches in the stainless steel, sand very lightly with dry 100 grit emery paper, rubbing in the direction of the
grain. After cleaning use a stainless steel polish, such as Stainless Steel Magic®.
TRIM KIT
ASSEMBLY
MOUNTING
BRACKET
SUPPORT
BASE
TRIANGULAR
CENTERING
NOTCH
LOCATE MOUNTING BRACKET
IN BOTTOM CORNERS
OF CUTOUT
HORIZONTAL
CLIP
ORIENTATION
ON MOUNTING
BRACKET
HORIZONTAL
CLIP ORIENTATION
ON BASE
TOP PIN
OF TRIM
BOTTOM PIN OF TRIM
SCREW HOLE
SCREW HOLE
FLANGE
1/8" HOLE FOR
MOUNTING
SCREW
CENTER
LINE
24 3/4" +1/16"-0"
CABINET CUT-OUT:
17" +1/16" -0"
CABINET
INSERT 2
1 1/2”
29 11/16”
18 7/8”
INSERT 3
INSERT 4
INSERT 1
Note: when installed, the trim assembly is positioned
symmetrically over the cabinet cut-out
Summary of Contents for Traditional Microwave trim kit
Page 4: ...P N 242601 Rev B 06 14 ...
