IF YOUR SMART DRIVE BEEPS FOR HELP
30
MUSICAL SERIES OF BEEPS*
EVERY 5 SECONDS AND...
POSSIBLE SOLUTIONS
HOT water temperature
1. Hot water supply is not hot enough to
light is flashing.
maintain the wash temperature you have
selected. Select a lower wash temperature.
2. Inlet hose screens may be blocked.
3. There may be a kink in the hose (Refer to
page 2A).
4. Hot tap has not been turned off.
5. Inlet hoses connected to the wrong taps.
COLD water temperature
1. Cold tap has not been turned on.
light is flashing.
2. Inlet hose screens may be blocked.
3. There may be a kink in the hose. (Refer to
page 2A).
4. Inlet hoses connected to the wrong taps.
5. Cold water temperature exceeds recommended
limits. (See Installation Instructions page 3A).
6. The flow rate of the supply water is too slow.
HOT and COLD water
1. The taps have not been turned on.
temperature lights are flashing.
2. Inlet hose screens may be blocked.
3. The hoses may be kinked. (Refer to page 3A).
4. The drain hose is too low or the drain hose is
pushed into the standpipe too far and the
water is siphoning out of the machine. (See
Installations Instructions page 1A).
5. The flow rate of the supply water is too slow.
HIGH water level light is
1. The machine is overloaded and can not agitate.
flashing.
Ensure the machine is stationary. Remove
items until the remaining ones can move freely.
2. Select a higher water level.
The first RINSE light or SPIN light
1. The machine has a suds build-up. (Too much
is flashing.
detergent may have been used for the amount
of soil in the load.) Wait for suds to dissolve
(about 20min). Rinse clothes using a deep
rinse.
Your Smart Drive is capable of diagnosing its own troubles. If your Smart Drive gives a
musical series of beeps every 5 seconds it is telling you that it has a problem which YOU
can solve using the checklist below.
* The beeps are the same sound your autowasher makes when you turn it on at the wall.
2408 SmartDrive U&C.qk 15/3/02 09:38 Page 32
