25
Identify the desired burner and the
corresponding dial.
When the burner is lit, turn the dial to any
setting between
HI
(high) and
SIM
(simmer).
Note: The clicking should stop as soon as
the burner is lit. If the burner doesn’t light,
and/or the clicking doesn’t stop, turn
the dial clockwise back to
OFF
refer to
'Troubleshooting' for advice.
When you have finished cooking, turn the
dial clockwise back to
OFF
.
If you are using LP gas, there may be
a slight extinction pop or flash at the flame
spreader a few seconds after the burner has
been turned off. This is normal.
1
2
3
4
BURNER USE
Selecting and using burners
Push the dial in and turn counterclockwise
to
LITE.
Hold the dial at
LITE
before turning
to a flame setting.
You should hear a clicking sound when
setting to
LITE
. If no clicking sound is
present, turn the dial back clockwise to
OFF
and refer to 'Troubleshooting' for advice.
