Do not
use
metallic
materials
that may
corrode,
stain and/
or
damage
floor
coverings.
B. Wind both front feet up and roll the product
out of position.
• Place the packing material in the
location diagonally opposite the front
roller that lifts off the floor.
• Make sure the packing material stays
in place when the product is pushed
back into position.
• Ideally, the packing material is large
enough to rest against the back wall so
as to prevent it from moving when the
cabinet is pushed into position.
Unstable Refrigerator
C. Roll the refrigerator back into position and adjust front feet as per step
7
C. (Check alignment and door closing
action are satisfactory).
Updated: Tue, 02 Jun 2020 23:55:17 GMT
Powered by
20
