Fisher & Paykel OR30SDPWIX, Installation Instructions And User Manual, Page: 50 / 60

48
Cooktop fault codes
Error codes on the cooking zones display
Error code Example What to do
Er20, Er31
or Er47
or
display
not operative
1
Switch off the cooker and disconnect it from the
mains.
2
Wait for about 1 minute, then reconnect the
cooker and turn on the cooking zones.
3
Wait for about 1 minute and if the error message
does not appear again the cooking zones can be
used.
4
If the problem continues make a note of the
error code, switch off the appliance and contact
your Authorised Service Centre.
E2
‘E’ and ‘2’ alternating for one or more cooking
zones.
This indicates an overheating of the cooking
zone/s.
1
Switch off the cooking zone/s and leave to cool.
2
If the problem continues do not use the
induction cooktop (only use the oven) and
contact your Authorised Service Centre.
E6 or
E7 or E9
or E5
1
Switch off the cooker and disconnect it from the
mains.
2
Wait about 1 minute, then reconnect the cooker
and turn on the cooking zones.
3
Wait for about 1 minute and if the error message
does not appear again, the cooking zone can be
used.
4
If the problem continues, make a note of the
error code, switch off the appliance and contact
your Authorised Service Centre.
US
CA