Fisher & Paykel OR30SDE6 Series, User Manual

Page: 20 / 68

18
OVEN FUNCTIONS
fan plus upper and lower elements
y
A two-step program. An initial 20 minute searing stage crisps and browns the roast and
caramelises the outside of the meat, then the temperature drops to the level you have
preset for the remainder of the cooking period, producing a tender and juicy roast that
is full of flavor.
y
Oven does not require preheating.
y
If desired, use the broil rack or grid, or place vegetables under the roast to allow the
juices to drain away from your meat. This will allow the hot air to circulate under the
meat as well.
Ideal for Roasting meat, chicken and vegetables.
ROAST
BAKE
VENT BAKE
FAN BAKE
GRILL
FAN GRILL
FAN FORCED
ROAST
CLASSIC BAKE
PASTRY BAKE
BAKE
VENT BAKE
FAN BAKE
GRILL
FAN GRILL
FAN FORCED
ROAST
CLASSIC BAKE
PASTRY BAKE
fan plus lower element
y
The fan circulates heat from the lower element throughout the oven.
y
Excellent for cooking pizza and flatbreads as it crisps the base beautifully without
overcooking the top.
y
Set the temperature to
GFX DIAL OR CON OVEN PYRO UL 1 KDM 19/06/17 Released for prototype only LEP
1 576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)
for optimum pizza cooking temperature.
Ideal for foods such as sweet and savoury pastry foods and delicate foods that require
some top browning eg frittata, quiche.
AERO PIZZA
BAKE
VENT BAKE
FAN BAKE
GRILL
FAN GRILL
FAN FORCED
ROAST
CLASSIC BAKE
PASTRY BAKE
GFX DIAL OR CON OVEN PYRO UL
1 KDM 19/06/17 Released for prototype only LEP
1 576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)
GFX DIAL OR CON OVEN PYRO UL
1 KDM 19/06/17 Released for prototype only LEP
1 576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)
GFX DIAL OR CON OVEN PYRO UL
1 KDM 19/06/17 Released for prototype only LEP
1 576636 1:1 1/1
1. REFER F&P DRAWING No. 578509 FOR PART FILE
2. ALL ARTWORK MUST BE APPROVED PRIOR TO MANUFACTURE
Graphics location:
3mm
5mm
Graphics to be PRINTED:
(PANTONE 440)