Fisher & Paykel HI90BLX1, Installation Instructions Manual

Page: 19 / 25

CLEANING AND MAINTENANCE
Carbon filters – for use in recirculation mode
Active carbon filters are disposable items designed to remove grease and odours from
cooking vapours before the air is channelled back into the kitchen. The active carbon
filters must be replaced periodically to work properly, at least every three months,
depending on the frequency with which the rangehood is used.
Note: fully saturated carbon filters can become a barrier to air movement therefore
limiting rangehood performance. In the event of fire, grease laden filters could
be flammable and therefore regular replacement is recommended.
CARBON FILTER-not suppiled
Activated carbon filter can be used to trap odors. Normally the activated carbon filter
should be changed every 3 to 6 months accord ing to your cooking habits. The installation
procedure of activated carbon filter is as below:
●
●
Insert the carbon filter in the rectangular hole,fitting it over the motor.
●
After inserting the front edge of the carbon filter into the slot on the cooker hood.
Lower the back edge of the carbon filter, until it clicks into
place at the rear of the
rectangular hole. Raise the two fixing bars, unti
l they are horizontal over the carbon
filter.
●
●
Apply reverse procedure to uninstall the carbon filter.
17
Replace the Mesh filter back to position.
Remove the mesh filter.
Replacing the LED light
Note: to replace the LED lights please refer to your nearest Fisher &Payket
trained and supported service technician, Customer Care, or contact us
through our website:
www.
fisher paykel.com