47
TROUBLESHOOTING
Solving operating problems
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Machine is
continually going
out of balance
Machine may not be level.
Check the machine is level and does
not rock in any direction, refer to
‘Levelling instructions’.
Too much water for the load
Ensure an appropriate water level is
selected for the load size (or select
‘Auto’ water level).
Refer to ‘Out of balance recovery
routine’ to change the out of
balance recovery mode.
Too much or too
little water when
filling on auto
water level
The machine needs to
determine the correct water
level for the load.
Refer to the ‘Wash options’ for more
information.
Some loads do not
suit ‘Auto’ water level,
eg pillows.
Manually select the most
appropriate water level for the load.
Machine is making
noises
Banging.
Load is out of balance. Touch
and redistribute the load.
Other noises.
Refer to ‘Caring for your washer’.
Small puddle
coming from
under the machine
The water level is too high
for the amount of clothes
and has caused excessive
splashing.
Select a lower water level.
Large bulky garments
(eg pillows duvet) can cause
splashing.
Wash on the
BULKY
cycle.
