6
Installation Instructions
Levelling
It is IMPORTANT to level the machine to
ensure even spin performance.
1
Separate the 4 rubber foot inserts from the
moulding and fit into the feet on the base of
the machine.
2
Move the machine to its final position.
(We suggest a minimum clearance of
20mm each side).
3
Adjust the feet so the machine is level and
cannot rock.
To Check if Your Machine is Level:
Look down on the wash bowl and make sure
it sits slightly forward of centre (see diagram).
Close the lid. Visually check that the lid fits
evenly on both sides.
If it does not look like the diagram in the middle, adjust one of the front feet slightly until it
matches. The diagram on the top and bottom are not correct.
4
Turn on the water and check all hose connections for leaks. Make sure there are no kinks in
the hose.
5
Uncoil power cord and plug into wall socket.
Lid Alignment
Lid
Lid
Lid
Topdeck
Topdeck
Topdeck
Wind left foot down
(out) to correct
Wind right foot down
(out) to correct
Adjustable feet
Rubber insert
Correct
Incorrect
To check levelling look down on the wash bowl
Summary of Contents for excellence GWC12
