Position the rails on the sides of the cabinet as shown in
the figure. Fix with the screws, then extract them
completely. If the coffee maker is installed over a
warmer drawer, use the top surface of this as a
reference to position the rails. In this case, there will be
no surface to rest the rails on.
Position the appliance on the rails, making sure the pins
are correctly inserted in the housings, then fix it with the
screws supplied. If the height of the appliance requires
adjusting, use the spacer disks provided.
Fix the power cable with the clip.
The power cable must be long enough to allow the
appliance to be extracted from the cabinet to fill the
coffee bean container.
The appliance must be earthed in compliance with
If necessary, correct alignment of the appliance by
positioning the spacers supplied under or at the sides of
the support.
Updated: Sun, 22 Mar 2020 12:25:55 GMT
Powered by
5