Installation instructions
Checking for transport damage
After removing the packaging, make sure the product is complete and undamaged and that all accessories are
present. Do not use the appliance if it is visibly damaged. Contact Customer Care.
Installing and connecting the appliance
• Installation must be performed by a qualified professional in compliance with legislation in force
in the country of installation (see
).
• This appliance should be connected to a circuit which incorporates an isolation switch providing
full disconnection from the power supply.
• The packing elements (plastic bags, polystyrene foam, etc.) should be kept out of reach of
children.
• Do not install the appliance in rooms where the temperature may drop to 0°C or lower.
• Customise the water hardness as soon as possible following the instructions in section
Changing and setting menu parameters
• Check that the mains power supply voltage corresponds to the value indicated on the rating
plate on the bottom of the appliance.
• Connect the appliance to an efficiently earthed and correctly installed socket with a minimum
current rating of 10A only.
• If the power socket does not match the plug on the appliance, have the socket replaced with a
suitable type by a qualified professional.
• To comply with safety directives, an omnipolar switch with a minimum contact distance of 3 mm
must be installed.
• Do not use multiple sockets or extensions.
• Safety cutout devices must be included in the mains power supply in compliance with the
installation regulations in the country concerned.
Disposal
Electrical appliances must not be disposed of as household waste.
Appliances with this symbol are covered by European Directive 2002/96/EC.
All unused electric and electronic appliances must be disposed of separately from household waste by taking
Updated: Sun, 22 Mar 2020 12:25:55 GMT
Powered by
1