9
1
Align the rails to the sides of the cabinet before securing using the provided screws.
Extending both rails fully.
●
If the coffee maker is installed over a warmer drawer, use the top surface of this as
a reference to position the rails.
●
In this case, there will be no surface to rest the rails on.
2
Fix the power cable with the clip. The power cable must be long enough to allow
the appliance to be pulled out from the cabinet to fill the coffee bean container.
●
The appliance must be earthed in compliance with legislation.
●
Electrical connections must be performed by a qualified electrician following
the instructions.
3
Position the appliance on the rails, making sure the pins are correctly inserted
in the housings, then fix it with the screws supplied. If the height of the appliance
requires adjusting, use the spacer disks provided.
4
If required, the alignment of the coffee maker can be adjusted by placing the
supplied spacers either under or to the sides of the rails.
5
To adjust the height of the coffee maker front by ±2mm, rotate the lever
located where the coffee maker and rails meet.
approx. 350mm
560mm min
0.07”
(1.8mm)
INSTALLATION INSTRUCTIONS