7
Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be
installed in a column and the column must be firmly fixed to the wall with commercially available brackets.
IMPORTANT!
●
All installation or maintenance operations must be performed with the appliance disconnected
from the mains electricity supply.
●
Kitchen furniture in direct contact with the appliance must be heat resistant 65°C min.
●
To guarantee correct ventilation, leave a gap at the bottom of the cabinet
(see measurements below).
PROUD INSTALL
FLUSH INSTALL
16–20mm
2mm
16–20mm
Electrical supply
CABINETRY DIMENSIONS
EB60 MODELS
mm
I
Minimum inside width of cavity
560
J
Overall width of cabinetry
600
K
Minimum inside height of cavity
450
L
Overall height of cabinetry
460
M
Minimum inside depth of cavity
545
n
Ventilation Air Gap
50
TOP
SIDE
M
J
I
L
k
n
20mm
20mm
CABINETRY DIMENSIONS (460mm HIGH CAVITY)