LOWER BASKET
CUTLERY TRAY
UPPER BASKET
●
The upper basket is designed to hold items like glasses, cups, saucers,
plates, small bowls and shallow pans.
●
Place larger utensils on or under the foldaway cup racks in the upper
basket. Ensure that knife blades are facing down and that light weight
items are weighted down or placed on the cupracks.
Removable spacing-adjustable tine rack
●
Designed to fit deep bowls (wide spacing) or small plates (narrow
spacing), depending on adjustment.
●
To adjust between wide and narrow spacings, slide the tines backward or
forward by pushing or pulling the handle at the front.
To adjust the tine spacing
●
To adjust between wide and narrow spacings, slide the tines backward or
forward by pushing or pulling the handle at the front.
Adjustable Foldaway Cup Racks
●
Use the cup racks to support mugs, cups and
glassware, and to secure large utensils and knives.
●
Adjust the height to suit the items stored on or
below the racks.
●
Fold the racks away if you need to make space for
taller items.
You can adjust these independently of each other to
any height:
1
Fold up to unlock the rack.
2
Adjust the height to suit by sliding up or down.
3
Fold down to lock in position.
●
Fold the racks away if you need the space.
Adjustable wine glass support racks
●
Use to support wine glasses and
stemware.
●
Adjust the height to suit the items
stored below the racks.
●
Fold the racks away if you need to
make space for taller items.
You can adjust these independently
of each other to any height:
1
Fold up to unlock the rack.
2
Adjust the height to suit by sliding
up or down.
3
Fold down to lock in position.
●
Fold the racks away if you need the
space.
Front right cup
rack hidden for
illustration
To lower the basket
To lift the basket
Stemware
notches
These notches
help support
long-stemmed
2
Adjust the height
to suit by sliding
up or down
3
Fold down to
lock in position
1
Fold up to
unlock the rack
●
Use the lower basket for your
largest dishes: pots, pans, lids,
serving dishes and bowls.
●
Ensure dishware items do not
block the spray arm above
from rotating.
●
Place larger plates between
the longer tines to maximise
stability.
●
If you need more height for tall
items, you can raise the upper
basket.
See instructions opposite.
Folding tine rack
●
These tines can be folded down if you need
the space for pots or other large items.
●
Release by pushing the small clips at the
rear and fold the tine sections down towards
each other.
Release by pushing
the small clips at
the rear and fold the
tine sections down
towards each other
Folding
tine racks
To remove the rack
Lift the rack up by the handle at the front
and slide out the hooks at the rear.
To replace the rack
Slot the hooks at the rear of the rack
onto the base of the basket and lower
the rack into place.
If needed, remove
the rack to make
space for larger
items.
Remove the Cutlery tray
To remove the cutlery tray
●
Gently pull the tray fully forwards and
lift it clear of the runners.
To replace the cutlery tray:
●
Place the tray back onto the runners
and click the rollers correctly into place.
●
Make sure that the runners are properly
aligned between the sets of rollers on
both sides of the tray.
Runner
Rollers
End stop
Gently pull the tray fully forwards
Lift the rollers clear of the end stops
and then the tray clear of the runners
Loaded with cutlery
and utensils
Slide sections
across to clear
space for tall
glassware below
A
B
C
D
Loading the cutlery tray
●
The cutlery tray is designed to hold
cutlery and utensils (
A
).
●
Use the cutlery tray to securely hold long
or sharp items like knives, chopsticks or
ladles. Place larger utensils in the middle
section of the tray, and ensure that knife
blades are facing down.
●
Arrange cutlery items on their side using
the notches in the trays.
●
Slide side sections to the centre if you
need space for tall items below (
B
).
Removeable Sections
To remove the side sections from
the main tray
(
C
)
●
Slide the sections to the centre of
the tray.
●
Lift each section up from the centre
of the tray to unhook the runners,
then lift the section up and out.
To refit the side sections into the
main tray
(
D
)
●
Refit the sections back into the
centre of the tray.
●
Slot the hooks at either end of the
section under the runners on the
front and back of the tray.
●
Align the edges of the section with
the runners and clip back into place.
Removeable spacing-
adjustable tine rack
Handle
Rack clips onto
basket wires
Adjusting the height of the Upper Basket
●
Adjust the height of the upper basket to create more space for tall
items in the lower basket.
●
You can adjust the height even when it is fully loaded, as you do not
have to remove it from the dishwasher.
●
If you are removing the basket fully, make sure that the runners are
aligned at the same height on both sides before re-inserting.
To lower the basket
●
Pull the lever up on one side and, without releasing it, carefully let the
basket drop down. Use the other hand to support the opposite side of
the basket, so that it doesn’t drop suddenly and damage loaded dishes.
●
Repeat for the other side.
To lift the basket
●
Hold it on one side and carefully pull upwards until it clicks into place.
Repeat for the other side.
●
Note: you do not need to lift the levers up when raising the height of
the basket back up.
591228 B / 0120501370C 10.17
