Fisher & Paykel DE7060G, Installation Manual/User Manual

Page: 27 / 40

25
DRYING CYCLE OPTIONS
Wrinkle Free
If you wish to minimise wrinkling, select one of the ‘Wrinkle
Free’ options. At the end of the cycle, the drum will rotate
periodically and cool air will be circulated through the load to
minimise wrinkling and creasing. This is particularly useful if
you cannot remove the items immediately after the cycle ends.
There are two wrinkle free options:
● ●
‘On’ provides ‘Wrinkle Free’ operation for 1 hour.
● ●
‘Extra’ provides ‘Wrinkle Free’ operation for 24 hours.
If you wish to stop the dryer at any stage during the ‘Wrinkle
Free’ stage of the cycle, simply touch . You can then open
the dryer door and remove your items. Press ‘Power’ to stop
the cycle and turn the dryer off.
Signal
The ‘Signal’ option automatically defaults to ‘On’ for all
cycles. This means a series of beeps will sound at the end of
a cycle, to alert you that the dryer has finished. You can turn
the ‘Signal’ off by touching the ‘Signal’ button until no lights
are illuminated.
When you select a dryness level above damp/dry and wish
your dryer to alert you to remove items once your load
reaches the damp/dry stage, touch the ‘Signal’ button once to
select ‘Damp Dry’. Ensure ‘On’ is also selected. When your load
reaches the damp/dry stage, the dryer will beep to alert you
to remove your items, then continue drying until the remaining
load reaches the dryness level you selected.
Indicator lights
The lint filter light will flash when the machine is
switched on as a reminder to clear the lint filter before
each cycle.
Keylock
This option enables you to deactivate the buttons on the display panel, except for
the ‘Power’ and buttons. This option helps prevent accidental button presses.
To turn Keylock mode ON or OFF, at any time when the dryer is powered on:
● ●
Touch and hold the button for 2 seconds.
Note: when activated, the light above the button is illuminated.
If Keylock mode is activated and the dryer is powered off:
● ●
To turn your dryer on, press the ‘Power’ button, then touch and hold the button
for two seconds to turn Keylock off. Select your drying cycle, any options and then
touch
to start the cycle.
Wrinkle Free
Indicators
Signal