Fisher & Paykel DE5060G Installation Instructions & User Manual Download Page 31

Page: 31 / 40

TROUBLESHOOTING

The following is a list of problems you may encounter when using this appliance and
some suggestions that may help to correct the problem. If you still have problems,
please contact your Fisher & Paykel Authorised Repairer.

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Pressing ‘Power’

does not turn

on the dryer.

Fault with household
power supply.

Try plugging in and turning on
another electrical appliance.

Touching

does not start

the drying cycle.

Dryer could be displaying a
user warning or fault code.

Refer to page 28.

‘Delay Start’ function is set.

Refer to page 26 for more
information.

Dryer keeps

stopping and

starting.

The ‘Wrinkle Free’ option has
been selected.

Refer to page 25 for more
information.

Dryer stops

working mid-

cycle.

Power failure.

Press ‘Power’ and restart the
desired cycle.

Dryer has been paused.

Touch the button to restart
the cycle.

Dryer door is open.

Ensure the door is firmly shut.

Dryer is taking

too long/

results were not

satisfactory.

Drying cycle selected not
appropriate for the load.

Select an appropriate cycle for the
load. Refer to pages 19, 22 and 23.

Dryness level selected not
appropriate for the load.

Select a higher dryness level. Refer
to page 24.

Selected drying temp, not
appropriate for the load.

Select a higher drying temp. Refer
to page 24.

Dryer overloaded for
the cycle.

Some cycles have a lower max. load
size. Refer to pages 22 and 23.
Try dividing the load in half and dry
half at a time.

Lint filter is blocked.

Clean the lint filter.

Load overly wet at the start
of cycle.

Remove more water from the load
before placing it in the dryer, eg
select a faster spin on your washer,
a speed appropriate for your load.

Clothes getting

too hot or

damaged.

Cycle selected not
appropriate for the load.

Ensure the cycle selected is
appropriate for items in the load.
Refer to pages 19, 22 and 23.

Items removed from dryer
before the end of cycle cool
down had finished.

Removing items before cool down
may damage clothing if it is not
spread out and exposed to cooler
air once removed from the dryer.

Summary of Contents for DE5060G









































Search results

Summary of Contents for DE5060G

Reviews:

Related manuals for DE5060G

Brands by name

Popular brands

Fisher & Paykel DE5060G, Installation Instructions & User Manual

Search results

Summary of Contents for DE5060G

Reviews:

Related manuals for DE5060G

Brands by name

Popular brands