background image

7

z

z

Do not store a full LP tank in direct sunlight.

z

z

After a period of storage or non-use, the appliance should be checked for gas leaks, 

deterioration, proper assembly, and burner obstructions before use.

General Use

z

z

This appliance is not intended to be installed in or on recreational vehicles, trailers or 

boats. 

z

z

After lighting burners, ensure they are operating correctly.

z

z

When using the appliance, be sure that all parts of the unit are firmly in place and that 

everything is stable.

z

z

On cart mounted units, never move without first allowing the appliance to cool, 

disconnecting the cable and ensuring that the gas supply is turned off.

z

z

Do not move the appliance during use.

z

z

Children should not be left alone or unattended in an area where the product is being 

used. Never allow them to sit, stand or play on or around the unit at any time.

z

z

Do not store items of interest to children around or below the appliance.

z

z

Never use the appliance in a windy area.

z

z

To put out flare-ups, adjust the controls to lower the temperature.

z

z

Do not obstruct the flow of combustion and ventilation to the appliance.

z

z

Spiders and insects can nest in the burners or openings and can block or restrict the 

burner. This can cause a flash back to the control panel which can cause a fire.

z

z

Do not try lighting this appliance without reading the lighting instruction in the user 

guide.

z

z

Do not locate, store or operate the appliance on a slope.

z

z

This product must be installed by a licensed plumber or gas fitter when installed within 

the Commonwealth of Massachusetts.

z

z

Never use a dented or rusty LP tank. Keep the ventilation openings of the cylinder 

enclosure free and clear from debris.

z

z

Clean and perform general maintenance on the appliance regularly. Watch for corrosion, 

cracks, or insect activity. Check the regulator, hoses, burner ports, air shutter, and 

venturi/valve section carefully. Always turn off gas at the source prior to inspecting.

z

z

You must inspect the unit at least once a year or immediately if the smell of gas is 

present in conjunction with the burner flames appearing yellow, the appliance does not 

reach temperature or heats unevenly or the unit makes popping noises.

z

z

Do not smoke while leak testing and extinguish all open flames.

z

z

When cleaning the burners centre the burner onto the orifice correctly and ensure they 

are level before lighting to prevent fire hazard or explosion. Refer to the user guide for 

detailed guidance. 

z

z

Use only a Ground Fault Interrupter (GFI) protected circuit with this outdoor cooking 

gas appliance.

z

z

Unplug from the outlet when not in use and before cleaning. Allow to cool before 

putting on or taking off parts.

z

z

Do not operate the appliance with a damaged cord, plug, or after the appliance 

malfunctions or has been damaged in any manner. Contact the manufacturer for repair.

z

z

Do not let the cord hang over the edge of a table or touch hot surfaces.

z

z

When connecting, first connect plug to the appliance then plug appliance into the 

outlet.

z

z

Do not place the unit directly on the ground or other surface without support. This will 

prevent damage to the regulator/hose assembly.

SAFETY AND WARNINGS

Summary of Contents for DCS GDSBE1























Reviews: