5
PARTS SUPPLIED
2
Clamping brackets (4)
and screws (4)
CG302DTB only
Clamping brackets (2)
and screws (2)
Installing multiple products
Note: We recommend installing products in separate cutouts with a minimum distance of 5 mm between the glass edges.
If installing multiple products adjacent to each other within the same cutout, a separate joining strip kit is required for installation.
The kit is available from the nearest Fisher & Paykel Authorised Service Centre or our local website listed at the end of this document.
If installing different products adjacent to each other (eg a wok burner next to an induction cooktop), the minimum clearance measurements for the different products may vary. Always use the greater distance.
Foam tape (1)