1
IMPORTANT!
SAVE THESE INSTRUCTIONS
The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our
website www.fisherpaykel.com or contact your local Fisher & Paykel dealer.
IMPORTANT SAFETY INSTRUCTIONS
●
This appliance shall be installed in accordance with the installation requirements of the
local gas authority or the appropriate installation code or in the absence of local codes
with the latest National Fuel Gas Code NFPA 54/ANSI Z223.1 or CAN/CSA B149.1,2
(Canada). Local building and electrical codes must be adhered to.
●
Electrical installation must be in accordance with the National Electrical Code, ANSI/
NFPA70 - latest edition or CSA C22.1 (Canada) and/or local codes.
●
Installation in manufactured (mobile) home: installation must conform with the
Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280 [formerly
the Federal Standard for Mobile Home Construction and Safety, Title 24, HUD (Part
280)] or, when such standard is not applicable, the Standard for Manufactured Home
Installations, ANSI/NFPA 225, or with local codes where applicable.
●
Installation in Recreational Park Trailers: installation must conform with state or other
codes or, in the absence of such codes, with the Standard for Recreational Park Trailers,
ANSI A119.5.
●
Do not remove permanently affixed labels, warnings, or plates from the product. This
may void the warranty.
●
Flexible appliance connectors shall meet the requirements of ANSI Z21.24 and State
Boards. They shall not exceed 35 1/2 inches (900 mm) in length. In order to avoid hazard,
these appliances must be installed according to these instructions.
●
This appliance must be installed by an authorized person (Warning: this appliance must
be installed by a licensed plumber or gas fitter when within the Commonwealth of
Massachusetts).
●
Please make this information available to the person installing the appliance as it could
reduce your installation costs.
●
Please leave these instructions with the appliance. Inform the customer to retain for
future reference and for the local inspectors’ use.
●
Failure to install the appliance correctly could invalidate any warranty or liability claims.
●
Leak testing of the appliance shall be conducted according to the manufacturer’s
instructions.
Only genuine replacement parts may be used for servicing the appliance. These are
available from your nearest Fisher & Paykel Service Center.
Before you install the appliance, please make sure that
●
the local distribution conditions (nature of gas and pressure) and the adjustment of the
appliance are compatible. For adjustment conditions for this appliance, see ‘Gas rate
summary’ under step 3.
●
a suitable isolating switch is incorporated in the fixed wiring in an acceptable position.
●
the appliance is connected to a power outlet that is electrically grounded in accordance
with local codes or in the absence of local codes, with the National Electric Code ANSI/
NFPA 70 or CSA C22.2 (Canada).
●
there is a power outlet (110-120V 60Hz) within reach of the appliance cable (35 1/2” (900
mm) from the center rear of the appliance). This must be accessible after installation. The
mains power supply cable should not touch any metal parts.
●
the countertop is square and level and no structural members interfere with space
requirements
●
the countertop is made of heat-resistant material.
●
you take note of the following recommended non-combustible materials: 1/4” (6 mm) flame
retardant millboard covered with not less than No. 28 MSG sheet steel, 1/32” (0.4 mm)
stainless steel,
●
1/32” (0.6 mm) aluminum or 1/32” (0.5 mm) copper.
●
the gas shut-off valve is accessible after installation.
●
if the power supply cable is damaged, it is replaced only by the special cable: Part no.
534901 Trml Block-flex Assy CG901 NZ US, obtainable from authorized Fisher & Paykel
Service Agents.
●
NOTE:
As servicing requires removing of the cooktop from the countertop we do not recommend
flush mounting. To the fullest extent permissible by law, the owner carries all risk for flush
mounting of the cooktop. The owner must ensure the cooktop has been cut out from the
benchtop before servicing can be carried out. Fisher & Paykel will not be liable for any
costs associated with removing or replacing a flush-mounted and/or sealed-in product,
nor for repairing any damage that may be incurred by doing this. Fisher & Paykel does not
exclude any statutory liability it may have and which by law cannot be excluded, because of
the giving of this notice.
1
SAFETY AND WARNINGS
WARNING!
Electrical Shock Hazard
Disconnect product from the mains power supply before servicing. This
appliance is equipped with a three-prong grounding plug for your
protection against shock hazard and should be plugged directly into a
properly grounded power outlet. Do not under any circumstances cut or
remove the grounding prong from this plug.
Failure to follow this advice may result in electrical shock or death.
WARNING!
Cut Hazard
Take care - panel edges are sharp.
Failure to use caution could result in injury or cuts.
!
!
