17
PROUD INSTALLATION
*The number of brackets varies based on your cooktop model
2
1
3
Turn the cooktop upside down
on a protective cover.
Apply adhesive foam seal around
the ceramic overhang, 3/16”
(5mm) in from the edge of the
glass. Ensure the adhesive side is
facing down to form a continuous
seal around the cooktop.
Trim any excess seal using a
sharp knife taking care not to
damage the cooktop or surface.
4
Gently lower the cooktop into
the cutout. Press gently on the
edges of the glass to ensure the
sealing material adheres to the
counter top.
5
Locate the side brackets* to the
appropriate slots on the cooktop
chassis. The correct slot height is
determined by the thickness of
your countertop.
6
Tighten all screws to secure the
cooktop to the countertop.
Ensure cooktop is level.
