9
EN
USING YOUR COOKTOP
OFF
HI
SIM
1
Identify the knob of the burner you
want to use.
3
After the burner has lit, adjust the flame
anywhere between HI and SIM.
●
Do not adjust or leave the knob
between HI and OFF.
IMPORTANT!
Turn the burner OFF and see
‘Troubleshooting’ for what to do next if
you experience any of the following:
●
There’s a strong gas smell.
●
The flame has been blown out by a draft
or extinguished by a spill and does not
re-ignite.
●
There is no clicking/sparking or there is
clicking/sparking, but a burner or burners
won’t light.
●
The flames don’t burn all the way
around a burner, or some flames flicker.
●
The flame is yellow or yellow-tipped
rather than blue.
●
The flames are too large, small, irregular,
noisy or lift away from the burner.
2
Press down then turn counter-clockwise
to
HI.
●
The ignitors start clicking as they spark.
CDV2-365H/304H models only:
●
All the halos will glow white.
●
Once the burner lights, the halo will
glow orange.
●
If there is no clicking, there is no spark
to light the burner. If the burner fails to
light turn the knob back to OFF and see
‘Troubleshooting’.
4
When you have finished cooking, turn the
knob clockwise back to OFF.
CDV2-365H/304H models only:
If you have other burners on:
●
The halo will glow white.
If you don’t have any other burners on:
●
All the halos will go out.
●
Check that the burner has gone out.
●
Before leaving the kitchen, check that
all burners have been turned off.
Burner
indicator
Halo
(Orange)
-H models
only