19
!4
WATER AND POWER SUPPLY CONNECTION
Water fittings kit
Water tap adaptor
(1)
Collet locking clip
(1)
IMPORTANT!
●
Ensure that the water connection is performed by a professional installer.
●
The product comes with a pre-connected plastic water tubing.
●
Water fittings are not supplied and must be purchased separately.
●
Ensure the appliance is connected to its own isolating switch.
●
Ensure there is enough tubing for the water connection and to pull
the appliance out for service, if required.
●
Flush water through the hose prior to connection to the product
to remove any debris in the hose.
Connect to water supply (Ice and Water models only)
1
Move the appliance in front of the cabinetry close enough that you still have
access behind for power and water connections (
A
).
2
Insert (
B
) the free end of the plastic water tubing fully into a water tap
adaptor and pull (
C
) gently to ensure it is locked in.
3
Secure connection by inserting a locking key (
D
) between the water tap
adaptor and locking collet.
4
Connect the water tap adaptor to a water tap (
E
).
– Flush water through the hose prior to connection to the appliance
to remove any debris in the hose.
5
Turn on the water tap and check all connection are dry and free of drips.
B
C
D
Connect to power supply
6
Locate the power cord and connect the fitted plug to the electrical supply
(230VAC, 50Hz) (
F
). Turn ON the appliance to test if working.
– If using an isolating switch, turn OFF the appliance before continuing
the installation.
A
E
F
