Tools
Cross-head screwdriver
Powered driver (optional)
Hex key
FPA spanner
DOOR PANEL INSTALLATION — STAINLESS STEEL
1
2
Attach the Stainless steel door panels
Open the door and loosen the M5x10
cross-head screws (do not remove) at
the sides of the doors
Hang the door panel by lowering the
holes of the hanging bracket onto the
M8 studs.
Slide the forks of the side brackets
onto the screws of the door.
Tighten the screws loosely to
temporarily secure the door panel.
3
Loosely screw the M8 washer and nut to
the stud using the hex key and spanner.
z
This will allow opening the door
without affecting adjustment of the
door panel.
28
