Move your appliance
The appliance is heavy and requires a minimum of two persons to unpack and install. Ensure
that the feet of the appliance are retracted. If the appliance is damaged, contact your
Fisher & Paykel dealer. Take note of your model and registration numbers located at the
lower right side of the appliance. You will need these to request for servicing or repair of your
appliance.
BEFORE INSTALLATION
Restrain the appliance to the cart with
straps.
Remove the brackets on the other side
of the appliance.
Tilt the appliance backward onto the
cart.
Set aside the pallet and push the cart
to the installation location.
Tilt the appliance slightly to the
opposite side.
Insert the hand truck under the side of
the appliance where the brackets were
removed.
z
Do not insert the hand truck to the
front or back of the appliance.
Remove the brackets from one side
of the appliance. (For single door
models, remove the brackets on the
non-hinged side of the appliance.)
z
Location of brackets depends on
the model of your appliance.
Remove the trims kit from the back of the
appliance. Refer to 'trims install kit (external
box)' for part included in the box.
Be careful when removing the carton as the
box may have dislodged from the rear of the
appliance during transit.
Remove the water fittings and
water filter kits, Installation kit,
and Miscellaneous items pack
from inside the appliance.
Water fittings &
Water filter kits
Installation kit
USER GUIDE
NZ AU GB IE HK SG IN US
ACTIVESMART™
INTEGRATED REFRIGERATOR
RS90A, RS9120W,
RS36A72, RS36A80 & RS36W80 models
Miscellaneous items pack
Check your appliance
Be careful when unpacking to prevent damage to the surface of your appliance. Ensure that
the appliance is stable to prevent from tipping over when unpacking. Do not open the doors
to prevent the appliance from tipping over. Ensure your appliance is the correct model as your
order. Ensure components and install kits are complete.
1
1
2
2
3
4
20
