10
7
CUSTOM DOOR PANEL INSTALLATION DIMENSIONS — RS80
Dimensions apply for the preparation and installation of custom door panels.
For
Dwg and Dxf files of the below panel preparation download the folder on
thekitchentools.fisherpaykel.com
.
Ensure handle is mounted
65mm from inner edge of panel
to the center — this will avoid
interference with brackets.
34.7mm
34.7mm
364mm
54.8mm
126.
1mm
17
6.
1mm
6
33.6mm
683.6mm
981mm
10
16mm
Ø 2mm REF
12x Pilot holes recommended for bracket attachment.
(Do not penetrate front surface).
342.3mm
TOP PANEL — REAR VIEW
All measurements to be made
from inner bottom corner.
For the second panel mirror
and repeat dimensions using
inner bottom corner as the
reference point.
Ø 2mm REF
10x Pilot holes recommended
for bracket attachment.
(Do not penetrate front surface).
335mm
111.5mm
29.1mm
87.2mm
492
m
m
542mm
366mm
All measurements to be made
from top and centerline.
BOTTOM PANEL — REAR VIEW
Cut outs are located in attachment bracket for Fisher & Paykel handles only.
If locating custom handle in the shaded area above, ensure handle screw heads
are counter sunk into back of panel to avoid interference with hanging bracket.
